Page 2 of 4

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:10
by bmiddaugh
Error 2:share not available

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:16
by bmiddaugh
23:13:13 T:6146174976 NOTICE: bool CAAudioUnitSink::setupAudio() total latency = 0.042708
23:13:13 T:6146174976 NOTICE: bool CAAudioUnitSink::setupAudio() setup audio format: [lpcm] Mixable Interleaved 2 Channel 32-bit Floating Point LE (48000Hz)
23:13:13 T:6146174976 NOTICE: void dumpAVAudioSessionProperties() audio route = HDMIOutput
23:13:13 T:6146174976 NOTICE: void dumpAVAudioSessionProperties() sampleRate 48000.000000
23:13:13 T:6146174976 NOTICE: void dumpAVAudioSessionProperties() outputLatency 0.000042
23:13:13 T:6146174976 NOTICE: void dumpAVAudioSessionProperties() IOBufferDuration 0.021333
23:13:13 T:6146174976 NOTICE: void dumpAVAudioSessionProperties() outputNumberOfChannels 2
23:13:13 T:6146174976 NOTICE: void dumpAVAudioSessionProperties() maximumOutputNumberOfChannels 6
23:13:13 T:6146174976 DEBUG: DumpAudioDescriptions: void dumpAVAudioSessionProperties()
23:13:13 T:6146174976 DEBUG: DumpAudioDescriptions: input count = 0
23:13:13 T:6146174976 DEBUG: DumpAudioDescriptions: output count = 1
23:13:13 T:6146174976 DEBUG: DumpAudioDescriptions : portName, HDMI
23:13:13 T:6146174976 DEBUG: DumpAudioDescriptions: channelLabel, 1
23:13:13 T:6146174976 DEBUG: DumpAudioDescriptions: channelName , HDMI 1
23:13:13 T:6146174976 DEBUG: DumpAudioDescriptions: channelLabel, 2
23:13:13 T:6146174976 DEBUG: DumpAudioDescriptions: channelName , HDMI 2
23:13:14 T:6142685184 DEBUG: DoWork - took 119 ms to load special://skin/backgrounds/settings.jpg
23:13:14 T:6146174976 DEBUG: CActiveAESink::OpenSink - DARWINIOS Initialized:
23:13:14 T:6146174976 DEBUG: Output Device : Default
23:13:14 T:6146174976 DEBUG: Sample Rate : 48000
23:13:14 T:6146174976 DEBUG: Sample Format : AE_FMT_FLOAT
23:13:14 T:6146174976 DEBUG: Channel Count : 2
23:13:14 T:6146174976 DEBUG: Channel Layout: FL,FR
23:13:14 T:6146174976 DEBUG: Frames : 1024
23:13:14 T:6146174976 DEBUG: Frame Size : 8
23:13:14 T:6146174976 DEBUG: CActiveAESink::GenerateNoise - noiseFactor = 0.000010
23:13:15 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x0008, unicode: 0x0000, modifier: 0x0
23:13:15 T:6145028096 DEBUG: OnKey: backspace (0xf008) pressed, action is Back
23:13:15 T:6145028096 DEBUG: CGUIWindowManager::PreviousWindow: Deactivate
23:13:15 T:6145028096 DEBUG: ------ Window Deinit (Settings.xml) ------
23:13:15 T:6145028096 DEBUG: CGUIWindowManager::PreviousWindow: Activate new
23:13:15 T:6145028096 DEBUG: ------ Window Init (Home.xml) ------
23:13:16 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x0114, unicode: 0x0000, modifier: 0x0
23:13:16 T:6145028096 DEBUG: OnKey: left (0xf082) pressed, action is Left
23:13:16 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x0114, unicode: 0x0000, modifier: 0x0
23:13:16 T:6145028096 DEBUG: OnKey: left (0xf082) pressed, action is Left
23:13:16 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x0114, unicode: 0x0000, modifier: 0x0
23:13:16 T:6145028096 DEBUG: OnKey: left (0xf082) pressed, action is Left
23:13:17 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x000d, unicode: 0x0000, modifier: 0x0
23:13:17 T:6145028096 DEBUG: OnKey: return (0xf00d) pressed, action is Select
23:13:17 T:6145028096 DEBUG: Activating window ID: 10002
23:13:17 T:6145028096 DEBUG: ------ Window Deinit (Home.xml) ------
23:13:17 T:6145028096 DEBUG: ------ Window Init (MyPics.xml) ------
23:13:18 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x000d, unicode: 0x0000, modifier: 0x0
23:13:18 T:6145028096 DEBUG: OnKey: return (0xf00d) pressed, action is Select
23:13:18 T:6145028096 DEBUG: ------ Window Init (DialogMediaSource.xml) ------
23:13:19 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x000d, unicode: 0x0000, modifier: 0x0
23:13:19 T:6145028096 DEBUG: OnKey: return (0xf00d) pressed, action is Select
23:13:19 T:6145028096 INFO: Loading skin file: FileBrowser.xml, load type: KEEP_IN_MEMORY
23:13:19 T:6145028096 DEBUG: found key /userdata/mediasources.xml
23:13:19 T:6145028096 DEBUG: ------ Window Init (FileBrowser.xml) ------
23:13:20 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x0112, unicode: 0x0000, modifier: 0x0
23:13:20 T:6145028096 DEBUG: OnKey: down (0xf081) pressed, action is Down
23:13:21 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x0112, unicode: 0x0000, modifier: 0x0
23:13:21 T:6145028096 DEBUG: OnKey: down (0xf081) pressed, action is Down
23:13:21 T:6145028096 DEBUG: Keyboard: scancode: 0x00, sym: 0x000d, unicode: 0x0000, modifier: 0x0
23:13:21 T:6145028096 DEBUG: OnKey: return (0xf00d) pressed, action is Select
23:13:21 T:6142685184 DEBUG: OpenDir: Using authentication url smb://
23:13:22 T:6145028096 DEBUG: ------ Window Init (DialogBusy.xml) ------
23:13:24 T:6142685184 ERROR: SMBDirectory->GetDirectory: Unable to open directory : 'smb://'
unix_err:'2' error : 'No such file or directory'
23:13:24 T:6145028096 DEBUG: ------ Window Init (DialogOK.xml) ------
23:13:24 T:6145028096 DEBUG: ------ Window Deinit (DialogBusy.xml) ------

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:26
by davilla
Did you do anything else when this issue occurred. adding new source, etc ?

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:27
by bmiddaugh
Nothing. The only change on this network has been mrmc updating to 3.04

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:31
by davilla
is CHATEAU-WOO-WOO your NAS ? With IP address of 192.168.0.14 ?

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:35
by bmiddaugh
Yes.

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:37
by davilla
Can you force it to use smb1 ? On my QNAP, I can do that.

And did you have force SMB v1 enabled previously ?

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:42
by bmiddaugh
Yes.
I forced it to smb1.
Restarted mrmc.
With libdsm disabled I get the share error.
If I re-enable and restart mrmc it finds the nas and other computers with shares but just hangs at working when attempting to access the folders.

This all started after the 3.04 update.

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:45
by davilla
Lets get you into testflight where we can push out fixes/reverts faster. email your email tied to the appleid you use to [email protected]

Re: Problem accessing NAS after 3.0.4 update

Posted: 27 May 2017, 03:47
by bmiddaugh
After waiting about 4 minutes, it has returned a login authorization failed with error code 6 error.
With libdsm on.