1. No user installed addons are supported, python or otherwise.
2. No, they really are not supported.
3. They are not coming back
4. Read from 1. again

Any mention of illegal streaming sites, addons or any pirated material will not be tolerated. This is not democracy and any offenders will be banned and posts deleted immediately without warning.

Other than that, we hope you enjoy MrMC so far and we welcome any input and feedback you might have.

Team MrMC.

Testing MrMC 3.9.0 for Google Play

Google Play Store and App Store beta test feedback
Audiomixer
Posts: 26
Joined: 04 Mar 2019, 18:12

Re: Testing MrMC 3.9.0 for Google Play

Post by Audiomixer » 09 Jul 2019, 22:31

Just installed update 7f3ef47 and it seems the auto start of plex addon is improving but very hit and mis as to it working consistently. Most of the time it simple goes to black screen as before but once in a while there is a long pause on the gray startup screen and after that plex will start normally.

Below the logs for both cases.

Crash to black screen just after “starting MrMC”
https://pastebin.com/mrMUbsM8

Very long pause with gray screen until “starting MrMC” is seen and then plex auto starts.
https://pastebin.com/VqLheumJ

cosmoxl
Posts: 1569
Joined: 12 Dec 2015, 14:16

Re: Testing MrMC 3.9.0 for Google Play

Post by cosmoxl » 10 Jul 2019, 15:49

I'm not getting any TrueHD passthrough with the latest build. DTS-HD/DTS:X works just fine.

https://paste2.org/DFLZ7ttX

If I uncheck IEC packed then it does work.

Audiomixer
Posts: 26
Joined: 04 Mar 2019, 18:12

Re: Testing MrMC 3.9.0 for Google Play

Post by Audiomixer » 10 Jul 2019, 16:39

I’m getting TrueHD and atmos passthrough with iec packed on or off.
Shield>denon x4500>Lg C8

cosmoxl
Posts: 1569
Joined: 12 Dec 2015, 14:16

Re: Testing MrMC 3.9.0 for Google Play

Post by cosmoxl » 10 Jul 2019, 17:13

Audiomixer wrote:
10 Jul 2019, 16:39
I’m getting TrueHD and atmos passthrough with iec packed on or off.
Shield>denon x4500>Lg C8
IIRC last time there were such problems it was the Denons that didn't work. Now it's my Onkyo. :)

BillyBudapest
Posts: 25
Joined: 29 May 2018, 20:42

TV section on Home Screen missing after update

Post by BillyBudapest » 10 Jul 2019, 19:39

TV section on Home Screen missing after update 7f3ef47 (also happened with previous one but just able to post now)

Can get it back via settings, Media sources, PVR clients, Tvheadend HTSP Client, Configure, OK

However after quitting and restarting MrMc it's missing again.

https://pastebin.com/d7zx103M

TheDarkKnight
Posts: 4
Joined: 20 May 2018, 20:06

Re: Testing MrMC 3.9.0 for Google Play

Post by TheDarkKnight » 11 Jul 2019, 18:44

cosmoxl wrote:
10 Jul 2019, 15:49
I'm not getting any TrueHD passthrough with the latest build. DTS-HD/DTS:X works just fine.

https://paste2.org/DFLZ7ttX

If I uncheck IEC packed then it does work.
Same here. Onkyo reciever. Having to uncheck IEC packed.

maglione66
Posts: 14
Joined: 08 Feb 2019, 14:53

Re: Testing MrMC 3.9.0 for Google Play

Post by maglione66 » 11 Jul 2019, 23:04

TheDarkKnight wrote:
11 Jul 2019, 18:44
cosmoxl wrote:
10 Jul 2019, 15:49
I'm not getting any TrueHD passthrough with the latest build. DTS-HD/DTS:X works just fine.

https://paste2.org/DFLZ7ttX

If I uncheck IEC packed then it does work.
Same here. Onkyo reciever. Having to uncheck IEC packed.
Idem to my. Marantz reciever.

Audiomixer
Posts: 26
Joined: 04 Mar 2019, 18:12

Re: Testing MrMC 3.9.0 for Google Play

Post by Audiomixer » 11 Jul 2019, 23:50

I also have an Lg SK9Y sound bar connected to my Sony xbr55x900f and with IEC packed on, lip sync always ends way off. Lip sync with it off stays spot on.

Fehritale
Posts: 17
Joined: 26 Mar 2018, 14:48

Re: Testing MrMC 3.9.0 for Google Play

Post by Fehritale » 12 Jul 2019, 06:55

Same for me with Onkyo. If IEC packed is off, passthrough is working fine. Is it on DTS-HD is working, TrueHD is not.

cosmoxl
Posts: 1569
Joined: 12 Dec 2015, 14:16

Re: Testing MrMC 3.9.0 for Google Play

Post by cosmoxl » 12 Jul 2019, 21:13

IEC packed with TrueHD is working again (for me) in latest build.

Post Reply