Page 36 of 118
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 22:28
by Montoya
pecinko wrote: 25 May 2018, 10:45
Montoya wrote: 24 May 2018, 22:00
Is it possible to incorporate for the PVR, that "long press" during play, on the touch pad of the Apple TV remote, brings up the channel list, just like it does in Opacity ?
I belive I already made it like that. Give it a test in *future* TestFlight and please report back.
@Pecinko
Feedback about this issue in Ariana with 180527.1712 @20180527-f53a2bd
"Long Press" during play doesn't bring up TV Channel List with program info and program run time (DVBLink PVR).
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 22:32
by jpalenz77
Ambilight works just fine with VTB but now even though I set brightness to 100%, the bulbs dont seem to go over 10-15% brightness
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 22:36
by davilla
Montoya wrote: 27 May 2018, 22:28
davilla wrote: 27 May 2018, 22:20
Ok, how about a 200-400MB chop off the front. Pretty please
Baring that, disable avf, enable hevc/hdr for vtb and play. The colors might be off but that's not important. How it plays it. There was just a fix for vtb and two byte NAL handling for hevc. I suspect something similar as shield is fine with it.
What software to use for chopping ?
BTW, this forum is scraped by search machine bots, you can edit/remove the search query I posted if you want.
If it was a URL link to an nzb, I'd edit it but just a title. not worried. Google can stick that up it's search engine's rear
osx, dd or split via command-line. split is easier, split -m 400 <filename>
then control-c after it splits out the 1st
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 22:39
by davilla
jpalenz77 wrote: 27 May 2018, 22:32
Ambilight works just fine with VTB but now even though I set brightness to 100%, the bulbs dont seem to go over 10-15% brightness
It might be 100 percent of the max percentage set by controller. That's the way dimming seems to work.
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 22:46
by jpalenz77
Can that be fixed? It is way too dark
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 22:53
by koying
Which model of bulb is it?
Also, bridge model (1=square; 2=round) and firmware version, please
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 22:54
by jpalenz77
Philips hue lct007
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 22:55
by jpalenz77
Hue A19
Re: Testing MrMC 3.7.0
Posted: 27 May 2018, 23:17
by jpalenz77
The bridge is the square shaped one. Firmware: 1802201122
Re: Testing MrMC 3.7.0
Posted: 28 May 2018, 01:50
by jabohn
davilla wrote: 27 May 2018, 16:50
progress and recently added areas are in a state of flux. There are a number of issues that need fixing. And many ways of having sources which all have different paths to progress and recently added.
FYI - no change in the latest build.