Page 3 of 28
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 15 Jan 2019, 22:27
by davilla
Try it via
smb/nfs rather than through plex client
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 15 Jan 2019, 22:46
by cosmoxl
davilla wrote: 15 Jan 2019, 22:27
Try it via
smb/nfs rather than through plex client
I think just forget about it. I just tested again and it's not hanging anymore. Three different files. Electronics.
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 15 Jan 2019, 22:52
by timstephens24
Everbrave wrote: 15 Jan 2019, 11:11
This means that the Receiver must support LPCM audio, i.e. Denon X2500H is dropped out of my selection; which Rec. do you use?
It should, my X4200W and X6500H both support LPCM and Atmos. What are you referring to with Rec? I have it set to auto switch based on the video format on my Shield and ATV4K.
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 15 Jan 2019, 22:56
by cosmoxl
Seeing a problem with tvOS home shelf posters not getting updated after I change them in Plex. To be clear, I had a movie that was unmatched. What showed was some thumbnail that Plex generated. Then I matched it and got a pretty poster. The old thumbnail remains on tvOS homeshelf.
Inside MrMC the change is quickly reflected but tvOS home shelf isn't changing even after a reboot.
Can anybody else confirm or do I chalk this up to some electromagnetic field interference like the hanging at 1 second left?
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 16 Jan 2019, 01:02
by davilla
cosmoxl wrote: 15 Jan 2019, 20:53
But non DD+ Atmos files have no problem.
As in TrueHD/Atmos ?
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 16 Jan 2019, 01:39
by Ted377
cosmoxl wrote: 15 Jan 2019, 22:56
Seeing a problem with tvOS home shelf posters not getting updated after I change them in Plex. To be clear, I had a movie that was unmatched. What showed was some thumbnail that Plex generated. Then I matched it and got a pretty poster. The old thumbnail remains on tvOS homeshelf.
Inside MrMC the change is quickly reflected but tvOS home shelf isn't changing even after a reboot.
Can anybody else confirm or do I chalk this up to some electromagnetic field interference like the hanging at 1 second left?
I did not notice that before, but I have the same problem
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 16 Jan 2019, 03:00
by cosmoxl
davilla wrote: 16 Jan 2019, 01:02
cosmoxl wrote: 15 Jan 2019, 20:53
But non DD+ Atmos files have no problem.
As in TrueHD/Atmos ?
When I wrote that I meant just any other file. But, see what I wrote above. Seems there was some temporary glitch. I'm not seeing the hang anymore. I'll let you know if it comes back.
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 16 Jan 2019, 06:50
by loekf2
timstephens24 wrote: 14 Jan 2019, 22:00
No issues so far, and the two files I have with EAC-3 plus Atmos plays back as Atmos.
Stupid question, does the audio track have to be E-AC3 ? You can convert TrueHD tracks to E-AC3 using e.g. FFMPEG, but the Atmos metadata is lost (same for eac3to, a PC tool). Not sure if there are any tools to do the trick.
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 16 Jan 2019, 14:43
by davilla
loekf2 wrote: 16 Jan 2019, 06:50
timstephens24 wrote: 14 Jan 2019, 22:00
No issues so far, and the two files I have with EAC-3 plus Atmos plays back as Atmos.
Stupid question, does the audio track have to be E-AC3 ? You can convert TrueHD tracks to E-AC3 using e.g. FFMPEG, but the Atmos metadata is lost (same for eac3to, a PC tool). Not sure if there are any tools to do the trick.
Atmos is packaged as extra data with only two formats, TrueHD and eac3. For now, MrMC only supports atmos if it is carried by eac3. There are no known tools or methods that can repackage truehd/atmos into eac3/atmos.
Re: Testing MrMC 3.8.0 - [Invites Closed]
Posted: 16 Jan 2019, 16:28
by loekf2
davilla wrote: 16 Jan 2019, 14:43
loekf2 wrote: 16 Jan 2019, 06:50
timstephens24 wrote: 14 Jan 2019, 22:00
No issues so far, and the two files I have with EAC-3 plus Atmos plays back as Atmos.
Stupid question, does the audio track have to be E-AC3 ? You can convert TrueHD tracks to E-AC3 using e.g. FFMPEG, but the Atmos metadata is lost (same for eac3to, a PC tool). Not sure if there are any tools to do the trick.
Atmos is packaged as extra data with only two formats, TrueHD and eac3. For now, MrMC only supports atmos if it is carried by eac3. There are no known tools or methods that can repackage truehd/atmos into eac3/atmos.
Was googling a bit. Got the impression with a recent ffmpeg and/or eac3to there are options.
Have to do some investigations. Also finally managed to download a UHD ISO with DV to use with the Dolby and x265 tools.