Page 2 of 5

Re: testing MrMC 3.0.5

Posted: 26 May 2017, 18:33
by KeyserSoze
Any chance for Legacy HDHomerun tuners for this go around? I'm probably harping or you're just trying to wait me out to see when I finally crack and go through the process of setting up a development environment again ;)

Re: testing MrMC 3.0.5

Posted: 26 May 2017, 20:10
by davilla
KeyserSoze wrote: 26 May 2017, 18:33 Any chance for Legacy HDHomerun tuners for this go around? I'm probably harping or you're just trying to wait me out to see when I finally crack and go through the process of setting up a development environment again ;)
HAHAHAAA, maybe I'll crack 1st. Upstairs AC stopped working (some wires fell off, wtf ?) so I had to clear a path to attic to get up into it. :) Need to move older unit up there with newer device so I can tap off the off-the-air antenna.

Re: testing MrMC 3.0.5

Posted: 26 May 2017, 20:11
by davilla
Itzme1234 wrote: 26 May 2017, 17:13 2D Monoscopic Worked for me. Cool, I had no idea MrMc even gave us that option. Or all those other options with SBS 3D. I saw that post on the other forum also.

I tested 2D Monoscopic on tvOS and on Firetv.
The issue was not if they worked but if 3D MKV files are displayed as 2D Monoscopic ?

Re: testing MrMC 3.0.5

Posted: 27 May 2017, 06:19
by amet
version 3.0.5 (170527.350)

- scan library using libdsm
- default samba for SMB:// files

Re: testing MrMC 3.0.5

Posted: 27 May 2017, 17:18
by jabohn
My shares stopped working after updating to this beta. Using libdsm, connecting to macOS Sierra 10.12.6 beta
I click on the share and it says "working" for a bit and then it pops up the password box. I put the password in but it just repeats the cycle. Everything worked fine last night when I was still running MrMC 3.0.4

Re: testing MrMC 3.0.5

Posted: 27 May 2017, 18:14
by amet
We have brought back smb1, check that you don't have that enabled... otherwise debuglog is needed to see what's wrong

Re: testing MrMC 3.0.5

Posted: 27 May 2017, 18:17
by jabohn
If you mean "Force SMB v1" then no it's not enabled. I'll work at getting the debug log.

FYI - step 2 in the debug log instructions is wrong. I had to look at the screenshot to find it.

Re: testing MrMC 3.0.5

Posted: 27 May 2017, 18:27
by amet
That's why it's there :)

I'll look at the instructions, we have changed some things there

Re: testing MrMC 3.0.5

Posted: 27 May 2017, 18:31
by jabohn
Here is the log
Debug Log

Re: testing MrMC 3.0.5

Posted: 27 May 2017, 20:42
by timstephens24
davilla wrote: 26 May 2017, 17:04 Reported that bug displaying 3D MKV files as 2D Monoscopic is still not fixed. Someone care to verify ?
I made a file from one of my movies, and it doesnt work. It plays what looks like part of the left eye, but a zoomed in section.