(20171125-c4410a6)
darwin: tvOS, include dynamic range with display rate switching
1. No user installed addons are supported, python or otherwise.
2. No, they really are not supported.
3. They are not coming back
4. Read from 1. again
Any mention of illegal streaming sites, addons or any pirated material will not be tolerated. This is not democracy and any offenders will be banned and posts deleted immediately without warning.
Other than that, we hope you enjoy MrMC so far and we welcome any input and feedback you might have.
Team MrMC.
2. No, they really are not supported.
3. They are not coming back
4. Read from 1. again
Any mention of illegal streaming sites, addons or any pirated material will not be tolerated. This is not democracy and any offenders will be banned and posts deleted immediately without warning.
Other than that, we hope you enjoy MrMC so far and we welcome any input and feedback you might have.
Team MrMC.
Testing MrMC 3.3.0
- timstephens24
- Posts: 894
- Joined: 09 Dec 2015, 22:43
Re: Testing MrMC 3.3.0
First I was just getting a black screen on SDR content, but completely closing and re-opening MrMC seems to have fixed it. I then tested Aladdin (1080p SDR) and it worked, tested BvS (4K HDR) and it worked, then tested Aladdin (1080p SDR) again and it worked.
- davilla
- Team MrMC
- Posts: 4377
- Joined: 26 Oct 2015, 17:01
Re: Testing MrMC 3.3.0
So all is good now ?timstephens24 wrote: ↑25 Nov 2017, 20:54 First I was just getting a black screen on SDR content, but completely closing and re-opening MrMC seems to have fixed it. I then tested Aladdin (1080p SDR) and it worked, tested BvS (4K HDR) and it worked, then tested Aladdin (1080p SDR) again and it worked.
- timstephens24
- Posts: 894
- Joined: 09 Dec 2015, 22:43
Re: Testing MrMC 3.3.0
Also I just tested out the Plex trailers on 10 random videos and they all worked (and switched refresh rate!).
Thanks to both of you!
Thanks to both of you!
- timstephens24
- Posts: 894
- Joined: 09 Dec 2015, 22:43
Re: Testing MrMC 3.3.0
Yup, all good. No issues that I've run into yet.davilla wrote: ↑25 Nov 2017, 21:02So all is good now ?timstephens24 wrote: ↑25 Nov 2017, 20:54 First I was just getting a black screen on SDR content, but completely closing and re-opening MrMC seems to have fixed it. I then tested Aladdin (1080p SDR) and it worked, tested BvS (4K HDR) and it worked, then tested Aladdin (1080p SDR) again and it worked.
- Everbrave
- Posts: 425
- Joined: 30 Dec 2016, 23:03
Re: Testing MrMC 3.3.0
I tested the frame rate switching on panning scenes from "The Martian" and it plays very smooth; the TV displays the frame rate.
Now, my Minix U1 is retired
Thanks a lot for the update
Now, my Minix U1 is retired
Thanks a lot for the update
-
- Posts: 78
- Joined: 07 Nov 2017, 07:33
Re: Testing MrMC 3.3.0
Frame rate and HDR/SDR switching looks to be working fine.
Out of interest you have the default delay set to 4 seconds, is this the recommended delay or can it be lowered without causing issues?
Out of interest you have the default delay set to 4 seconds, is this the recommended delay or can it be lowered without causing issues?
- timstephens24
- Posts: 894
- Joined: 09 Dec 2015, 22:43
Re: Testing MrMC 3.3.0
You can lower it to whatever you want. 4 seconds is a little too long for my TV/AVR combo, but it really depends on how long it takes your devices to switch. My last TV needed it be at 6. Turning it off just starts things playing right away and you might miss a few seconds at the beginning.
- davilla
- Team MrMC
- Posts: 4377
- Joined: 26 Oct 2015, 17:01
Re: Testing MrMC 3.3.0
Sure, it can be lowered. I'm at three seconds and seems like it could go lower for my setup.
-
- Posts: 78
- Joined: 07 Nov 2017, 07:33
Re: Testing MrMC 3.3.0
Thanks. I’ll do some testing.
Unrelated, but is there any way to hide certain libraries imported using Plex?
Unrelated, but is there any way to hide certain libraries imported using Plex?