problem with ac3 tracks since last update

Rootax · Post by **Rootax** » 31 Dec 2018, 09:13

Since the latest beta (supposed to fix some ac3 problems), videos with Dolby digital / ac3 tracks are problematic. Every 2 secondes the sounds goes off, then on again, then off, etc. It's not like the volume goes to 0, no, it's that no audio signal is sent to the amp.
E-AC3 and all other formats are ok, only AC3 tracks are problematic now.

Thx.

https://pastebin.com/VDjJmGHN

Rootax · Post by **Rootax** » 15 Jan 2019, 22:13

No one ? :/

jumbo_ · Post by **jumbo_** » 16 Jan 2019, 22:37

Same here, My setup is FireTV2 -> Denon1920.

If passthrough is enabled, the sound on AC3 goes on and off in regular short intervals. Also gets out of sync quickly. DTS works fine.
If passthrough is disabled, there are no issues.

I can create a debuglog as well, if needed.

Angryunibrow · Post by **Angryunibrow** » 19 Jan 2019, 19:15

I have this issue also, had to turn off AC3 in passthrough settings.

Maybee · Post by **Maybee** » 23 Jan 2019, 21:18

I can confirm the issue.

Rootax · Post by **Rootax** » 12 Feb 2019, 20:20

With latest 3.8.0, now the problematics situations has changed, the "on/off/on/off" tracks are now played in PCM, not AC3/DD. So, no more problem in playing, buuuuuut kind off, since all other player can play them all right, in DD/AC3 and not PCM, and Mrmc before 3.7.1 could too...

Rootax · Post by **Rootax** » 18 Feb 2019, 21:07

Ok with latest testflight.

problem with ac3 tracks since last update

problem with ac3 tracks since last update

Re: problem with ac3 tracks since last update

Re: problem with ac3 tracks since last update

Re: problem with ac3 tracks since last update

Re: problem with ac3 tracks since last update

Re: problem with ac3 tracks since last update

Re: problem with ac3 tracks since last update