1. No user installed addons are supported, python or otherwise.
2. No, they really are not supported.
3. They are not coming back
4. Read from 1. again

Any mention of illegal streaming sites, addons or any pirated material will not be tolerated. This is not democracy and any offenders will be banned and posts deleted immediately without warning.

Other than that, we hope you enjoy MrMC so far and we welcome any input and feedback you might have.

Team MrMC.

Problem with HDR playback

Any issues that are Nvidia Shield TV specific
Slice314
Posts: 50
Joined: 14 Feb 2018, 12:07

Re: Problem with HDR playback

Post by Slice314 »

Any news on this subject? is it getting fixed for the 3.5.1? @davilla
helicon9
Posts: 4
Joined: 19 Mar 2018, 15:53

Re: Problem with HDR playback

Post by helicon9 »

I have this same issue.
However it is the same problem on MrMC, SPMC and Kodi.
It used to be that the Shield would only output HDR content at 50hz and above, but it seems that was fixed in the Shield 5.0 update to allow HDR at 24/25 also.
So I don't know if this is a bug with the shield or something changed in MrMC/SPMC/Kodi.

If I have adjust refresh rate set and my HDR file plays at 24p my TV displays that it is receiving HDR signal but it quickly flicks back to SDR. Turning off the adjust refresh rate option and HDR works fine at 60, but obviously the pull down stutter makes it painful to watch!
User avatar
davilla
Team MrMC
Posts: 4377
Joined: 26 Oct 2015, 17:01

Re: Problem with HDR playback

Post by davilla »

Which version Shield firmware ?
User avatar
koying
Team MrMC
Posts: 443
Joined: 20 Mar 2016, 17:49

Re: Problem with HDR playback

Post by koying »

Fix will be in MrMC, soon.
In Kodi/SPMC, you probably still get it because your "refresh rate delay" is too low.

Problem is that HDR is triggered by first picture of the video, but reset by refresh rate switch.
So, if the delay is too low, you get:
- First Pic
- HDR mode
- Refresh rate switch -> HDMI reset -> HDR reset

The delay ensures the first pic (and HDR switch) only happens after the refresh switch is completed.
Slice314
Posts: 50
Joined: 14 Feb 2018, 12:07

Re: Problem with HDR playback

Post by Slice314 »

For HDR content, SPMC Krypton a2 is working perfectly fine, HDR triggers 10 out of 10 times.

I use a 3 seconds delay.

MrMC triggers HDR very randomly, maybe 1 out of 10 times (using the same settings with SPMC)

I use the latest 6.3 firmware versión (shield)

Can’t wait for the fix for the full switch to MrMC, lately almost everything I get movie wise is 4K HDR
veroxii
Posts: 11
Joined: 21 Mar 2018, 00:56

Re: Problem with HDR playback

Post by veroxii »

Just adding another data point that I'm having this exact same issue.

Shield 2017, with Pioneer AVR and Sony TV.
treefiddy
Posts: 3
Joined: 20 May 2018, 06:08

Re: Problem with HDR playback

Post by treefiddy »

koying wrote: 20 Mar 2018, 20:19 Fix will be in MrMC, soon.
In Kodi/SPMC, you probably still get it because your "refresh rate delay" is too low.

Problem is that HDR is triggered by first picture of the video, but reset by refresh rate switch.
So, if the delay is too low, you get:
- First Pic
- HDR mode
- Refresh rate switch -> HDMI reset -> HDR reset

The delay ensures the first pic (and HDR switch) only happens after the refresh switch is completed.
Hi koying,

i am still using your krypton a2 spmc version because there is nothing better yet.

Can you already tell when MrMC will be on the same level? ;-)
treefiddy
Posts: 3
Joined: 20 May 2018, 06:08

Re: Problem with HDR playback

Post by treefiddy »

no news yet? :(
User avatar
davilla
Team MrMC
Posts: 4377
Joined: 26 Oct 2015, 17:01

Re: Problem with HDR playback

Post by davilla »

should be fixed for 3.7.0
BustyChicksFTW
Posts: 3
Joined: 26 Jul 2018, 02:14

Re: Problem with HDR playback

Post by BustyChicksFTW »

It would definitely help my switch from Kodi to MrMC!
Post Reply