1. No user installed addons are supported, python or otherwise.
2. No, they really are not supported.
3. They are not coming back
4. Read from 1. again

Any mention of illegal streaming sites, addons or any pirated material will not be tolerated. This is not democracy and any offenders will be banned and posts deleted immediately without warning.

Other than that, we hope you enjoy MrMC so far and we welcome any input and feedback you might have.

Team MrMC.

Testing MrMC 3.7.0 - [Invites Closed]

Old TestFlight threads
Locked
SUPERBIF
Posts: 170
Joined: 31 Mar 2016, 06:43

Re: Testing MrMC 3.7.0

Post by SUPERBIF »

Updated to the latest version last night, and my PlexForKodi dissapeared, where do I find it? In extensions?
Top
inariel12
Posts: 48
Joined: 29 Dec 2017, 12:11

Re: Testing MrMC 3.7.0

Post by inariel12 »

SUPERBIF wrote:Updated to the latest version last night, and my PlexForKodi dissapeared, where do I find it? In extensions?
Yes, you have to reenable it manually. Extensions are disabled by default in the latest TestFlight build.


Inviato dal mio iPhone utilizzando Tapatalk
Top
cosmoxl
Posts: 1759
Joined: 12 Dec 2015, 14:16

Re: Testing MrMC 3.7.0

Post by cosmoxl »

davilla wrote: ↑16 May 2018, 04:14
cosmoxl wrote: ↑16 May 2018, 03:15
cosmoxl wrote: ↑06 May 2018, 16:09 With this latest shield I've had a couple times now where MrMC stops responding to the play/pause button of the firestick (bluetooth) remote that I use.

https://paste2.org/waYWMWj4

Perhaps that log will have something.
Was anything found re this problem? I think this post slipped through the cracks during a busy time.
Nothing in log, MrMC is just not getting the key press. Does the original shield remote show the same ?
Original shield remote has no play/pause, ff, rw buttons so I'm not sure what you mean.

The important thing to note with the firestick remote is that if I instead press the center button to bring up the OSD, click play/pause of OSD, then the play/pause button on the remote will work again for a little while.

So, I think it's something in MrMC, in one of the recent updates (because it has never done this until this testflight and I've been using SPMC to playback 1080i broadcast recordings and it doesn't happen in there either).
Top
User avatar
timstephens24
Posts: 894
Joined: 09 Dec 2015, 22:43

Re: Testing MrMC 3.7.0

Post by timstephens24 »

cosmoxl wrote: ↑16 May 2018, 13:49 Original shield remote has no play/pause, ff, rw buttons so I'm not sure what you mean.
It actually does. The middle area that's a touch sensitive spot if you double tap you get play/pause.
Top
cosmoxl
Posts: 1759
Joined: 12 Dec 2015, 14:16

Re: Testing MrMC 3.7.0

Post by cosmoxl »

timstephens24 wrote: ↑16 May 2018, 16:13
cosmoxl wrote: ↑16 May 2018, 13:49 Original shield remote has no play/pause, ff, rw buttons so I'm not sure what you mean.
It actually does. The middle area that's a touch sensitive spot if you double tap you get play/pause.
:shock: Thanks for that! Will try next time the firestick remote acts up.
Top
cosmoxl
Posts: 1759
Joined: 12 Dec 2015, 14:16

Re: Testing MrMC 3.7.0

Post by cosmoxl »

davilla wrote: ↑16 May 2018, 04:14
cosmoxl wrote: ↑16 May 2018, 03:15
cosmoxl wrote: ↑06 May 2018, 16:09 With this latest shield I've had a couple times now where MrMC stops responding to the play/pause button of the firestick (bluetooth) remote that I use.

https://paste2.org/waYWMWj4

Perhaps that log will have something.
Was anything found re this problem? I think this post slipped through the cracks during a busy time.
Nothing in log, MrMC is just not getting the key press. Does the original shield remote show the same ?
OK, Thanks to Tim I tried the pause/play "button" of the Shield remote. It also exhibits the same behavior as described in my previous posts.
Top
User avatar
pecinko
Posts: 200
Joined: 02 Dec 2015, 10:55

Re: Testing MrMC 3.7.0

Post by pecinko »

cosmoxl wrote: ↑16 May 2018, 17:23
davilla wrote: ↑16 May 2018, 04:14
cosmoxl wrote: ↑16 May 2018, 03:15

Was anything found re this problem? I think this post slipped through the cracks during a busy time.


Nothing in log, MrMC is just not getting the key press. Does the original shield remote show the same ?
OK, Thanks to Tim I tried the pause/play "button" of the Shield remote. It also exhibits the same behavior as described in my previous posts.
What skin are you using?
Top
cosmoxl
Posts: 1759
Joined: 12 Dec 2015, 14:16

Re: Testing MrMC 3.7.0

Post by cosmoxl »

pecinko wrote: ↑16 May 2018, 18:54
cosmoxl wrote: ↑16 May 2018, 17:23
davilla wrote: ↑16 May 2018, 04:14



Nothing in log, MrMC is just not getting the key press. Does the original shield remote show the same ?
OK, Thanks to Tim I tried the pause/play "button" of the Shield remote. It also exhibits the same behavior as described in my previous posts.
What skin are you using?
Opacity
Top
jrcorwin
Posts: 73
Joined: 28 Nov 2017, 18:44

Re: Testing MrMC 3.7.0

Post by jrcorwin »

davilla wrote: ↑16 May 2018, 01:59 Does the native plex client have the same issue ?
No, it plays fine in the native tvOS Plex app. Directv streams the video, but of course transcoded the HD audio. Plays fine though.
Top
User avatar
davilla
Team MrMC
Posts: 4377
Joined: 26 Oct 2015, 17:01

Re: Testing MrMC 3.7.0

Post by davilla »

jrcorwin wrote: ↑16 May 2018, 21:05
davilla wrote: ↑16 May 2018, 01:59 Does the native plex client have the same issue ?
No, it plays fine in the native tvOS Plex app. Directv streams the video, but of course transcoded the HD audio. Plays fine though.
Sorry, I mean via MrMC's native Plex client vs the Plex extension ?
Top
Locked

Return to “Read Only”