1. No user installed addons are supported, python or otherwise.
2. No, they really are not supported.
3. They are not coming back
4. Read from 1. again

Any mention of illegal streaming sites, addons or any pirated material will not be tolerated. This is not democracy and any offenders will be banned and posts deleted immediately without warning.

Other than that, we hope you enjoy MrMC so far and we welcome any input and feedback you might have.

Team MrMC.

Testing MrMC 3.3.1

mrs4t4n
Posts: 20
Joined: 21 Nov 2017, 14:05

Re: Testing MrMC 3.3.1

Post by mrs4t4n » 04 Dec 2017, 17:45

i'm rightt now on last testflight... And the tv shows no HDR flag, i also tried setting the atv in 4k@60Hz HDR, when i started playing the HDR goes away and when i stopped the playback, the shows that the ATV set to HDR...

I'm uploading two videos right now of the first 15 sec of Fargo S03E01... i think you could see perfectly the issue i was talking about...

mrs4t4n
Posts: 20
Joined: 21 Nov 2017, 14:05

Re: Testing MrMC 3.3.1

Post by mrs4t4n » 04 Dec 2017, 17:50

With VLC:
https://www.youtube.com/watch?v=JywkvRm1D8Y

With MrMC
https://www.youtube.com/watch?v=nob6toOA7Jg

(the cámara shows more darker (both videos) that it is...)

User avatar
davilla
Team MrMC
Posts: 2462
Joined: 26 Oct 2015, 17:01

Re: Testing MrMC 3.3.1

Post by davilla » 04 Dec 2017, 18:06

Is MrMC set to limited or full range color ?

mrs4t4n
Posts: 20
Joined: 21 Nov 2017, 14:05

Re: Testing MrMC 3.3.1

Post by mrs4t4n » 04 Dec 2017, 18:16

Is set to limited (full range makes the interface looks bad)

BTW, i also check the file with the last infuse (also supports dynamic chages) and plays fine...

JEGORIV
Posts: 1
Joined: 04 Dec 2017, 22:23

Re: Testing MrMC 3.3.1

Post by JEGORIV » 04 Dec 2017, 22:29

davilla wrote:
04 Dec 2017, 00:31
roll call testers :) everything good ?
If from aptv4k settings I format in 4K SDR 60 hrz and play a HDR or Dolby Vision movie I think it does not make the automatic change.

But the worst is the sound. It's a while in DTS or DOLBY according to the movie and it breaks with that horrible noise. That it does it in DTS it is worth but in Dolby 5.1 ??

Anyway is great this taste of kodi over apple ;)

User avatar
davilla
Team MrMC
Posts: 2462
Joined: 26 Oct 2015, 17:01

Re: Testing MrMC 3.3.1

Post by davilla » 04 Dec 2017, 22:42

JEGORIV wrote:
04 Dec 2017, 22:29
davilla wrote:
04 Dec 2017, 00:31
roll call testers :) everything good ?
If from aptv4k settings I format in 4K SDR 60 hrz and play a HDR or Dolby Vision movie I think it does not make the automatic change.

But the worst is the sound. It's a while in DTS or DOLBY according to the movie and it breaks with that horrible noise. That it does it in DTS it is worth but in Dolby 5.1 ??

Anyway is great this taste of kodi over apple ;)
I'll recheck setting tvOS to 4k/SDR/60. I normally live at 4k/HDR/60.

For DTS or DOLBY issue, turn off loud noise <something> in tvOS settings. For DTS/DD to passthrough correctly, it must be off.

FranknStein7
Posts: 3
Joined: 05 Dec 2017, 00:21

Re: Testing MrMC 3.3.1

Post by FranknStein7 » 05 Dec 2017, 00:29

On 20171203-e69e483 build for TvOS, I can confirm that LG Dolby Vision test videos are playing back in Dolby Vision (MKV format). I cannot seem to get Dolby Vision titles ripped with MKVmerge to play back in DV however (although there are rumors MKVmerge will not preserve the DV metadata). I will have to do some more testing.

Edit: Doing a little more investigation and reading the DV white paper: https://www.dolby.com/us/en/technologie ... -paper.pdf (warning PDF), is this an issue of single vs. dual layer composition? I've guessing the DV test files I'm using use a single layer, while UHD titles use a dual layer. Is it possible the current MrMC implementation only supports single layer?

User avatar
davilla
Team MrMC
Posts: 2462
Joined: 26 Oct 2015, 17:01

Re: Testing MrMC 3.3.1

Post by davilla » 05 Dec 2017, 01:31

FranknStein7 wrote:
05 Dec 2017, 00:29
On 20171203-e69e483 build for TvOS, I can confirm that LG Dolby Vision test videos are playing back in Dolby Vision (MKV format). I cannot seem to get Dolby Vision titles ripped with MKVmerge to play back in DV however (although there are rumors MKVmerge will not preserve the DV metadata). I will have to do some more testing.

Edit: Doing a little more investigation and reading the DV white paper: https://www.dolby.com/us/en/technologie ... -paper.pdf (warning PDF), is this an issue of single vs. dual layer composition? I've guessing the DV test files I'm using use a single layer, while UHD titles use a dual layer. Is it possible the current MrMC implementation only supports single layer?
Super on the 1st part :)

On 2nd part, mediainfo and debuglog please.

FranknStein7
Posts: 3
Joined: 05 Dec 2017, 00:21

Re: Testing MrMC 3.3.1

Post by FranknStein7 » 05 Dec 2017, 01:54

davilla wrote:
05 Dec 2017, 01:31
FranknStein7 wrote:
05 Dec 2017, 00:29
On 20171203-e69e483 build for TvOS, I can confirm that LG Dolby Vision test videos are playing back in Dolby Vision (MKV format). I cannot seem to get Dolby Vision titles ripped with MKVmerge to play back in DV however (although there are rumors MKVmerge will not preserve the DV metadata). I will have to do some more testing.

Edit: Doing a little more investigation and reading the DV white paper: https://www.dolby.com/us/en/technologie ... -paper.pdf (warning PDF), is this an issue of single vs. dual layer composition? I've guessing the DV test files I'm using use a single layer, while UHD titles use a dual layer. Is it possible the current MrMC implementation only supports single layer?
Super on the 1st part :)

On 2nd part, mediainfo and debuglog please.
Sure thing! Note there are two files contained in the .ts video file, the primary 3840x2160 video, and separate 1920x1080p file. The 1920x1080p file is likely the Dolby Vision metadata. I believe this is how all UHD dolby vision titles work (i.e., dual layer composition).

Debug: https://pastebin.com/W5xRS6kf
Mediainfo: https://pastebin.com/RY4nhVrj

User avatar
timstephens24
Posts: 429
Joined: 09 Dec 2015, 22:43

Re: Testing MrMC 3.3.1

Post by timstephens24 » 05 Dec 2017, 02:43

FranknStein7 wrote:
05 Dec 2017, 00:29
I cannot seem to get Dolby Vision titles ripped with MKVmerge to play back in DV however

Is it possible the current MrMC implementation only supports single layer?
I think it's the way remuxing the file off the disc is done and then muximg the tracks together doesn't actually get or preserve the DV metadata and only the HDR10. I highly doubt it's MrMC since no other device or application can play those remuxes with DV.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests